A. The length limits are not for the particular cables as such, they are for the type of data signal that they carry.

Let me try and explain!

Thinnet (RG58 coax) was used for 10Base2 Ethernet, at 10Mbps on RG58 coax Ethernet can reliably operate upto a distance of 185m. The native cabling environment of the AS400 is Twinax and the standard operating speed is only 1Mbps. At this speed it has a maximum distance of 1800m, however, if Cat 5 forms part or all of the link the distance can drop to between 36m and 364m.

So for a proprietary network such as Thinnet, the distance is set at the maximum length that the signal will work reliably at a given speed over a given type of cable. So far so good!

Now, when we talk about Cat 5, 5e, 6 etc. these are cabling 'Standards' which define a method of connecting all types of networking protocols, over a cabling system that uses a common media, common connectors and a common topology. So the length limit was arbitrarily set for the worst case scenario. 10BaseT may well work on Cat 5 for 150m but ATM, AS400, Token Ring etc. may not, and because a structured cabling system has to work for all networking methods, a limit had to be set.

I don't think I have explained this very well but I hope you get idea. Incidentally, I have heard talk of the length limit being dropped from the standards as it is the overall Attenuation to Crosstalk Ratio which determines a cables ability to transmit a signal successfully, and not the length of the cable. If anyone can elaborate on this point please let me know.